JVC HR-J748E Select Channel to, Watch, SET Counter Display, Reset Counter, Display Remaining Time

EN23

	Record One Programme
Recording
	If your recorder is connected to the TV via AV connection, . . .
Features	While Watching Another
	. . . press TV/VCR. The recorder's VCR indicator and the TV
	broadcast being recorded disappear.

RESET		SELECT CHANNEL TO
		WATCH
COUNTER		Once recording is in progress, all you need to do is to
		set the channel controls on the TV for the station you
		1 wish to view.
		● The programme selected with the TV’s channel
		controls appears on the TV screen while the one
	q	selected with the recorder's TV PROG. buttons is
		recorded on the tape.
		● If a decoder is connected to the recorder (☞ pg. 35),
PROG.TV		you can select a scrambled channel as well with the
		TV channel controls.

DISPLAY

	2
1	2	3
4	5	6
7	8	9
C.RESET	0	4

TV PROG.

TV/VCR

3 1

Elapsed Recording Time Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

1 Press DISPLAY until a counter reading appears on the dispay panel.

RESET COUNTER

2 Press C.(COUNTER) RESET before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press DISPLAY until the time remaining on the tape appears.

●By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.

*channel position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.