JVC HR-J672EK, HR-J670EK, HR-J470EK, HR-J270EK setup guide Playback, Activate HIGH-SPEED Search

ATTENTION

In the search, still, slow-motion or frame-by-frame playback mode,

●the picture will be distorted.

●noise bars will appear.

●there will be loss of colour with a tape recorded in LP mode.

●Please note that on models HR-J270EK the picture may be distorted in these modes.

Still Picture/Frame-By-Frame Playback

1		PAUSE DURING PLAYBACK
		Press PAUSE. If there is vertical jitter, use the PR buttons
		to correct the picture.
		ACTIVATE FRAME-BY-FRAME
2		PLAYBACK
		Press PAUSE. Each time PAUSE is pressed the tape will
	ORadvance one frame.
		Press @ or #. Each time one of these buttons is pressed
		the tape will move one frame in the direction of the
		arrow.

To resume normal playback, press PLAY.

Slow Motion

ACTIVATE SLOW-MOTION PLAYBACK

1 During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.

OR

During still picture, press and hold @ or #. Release to return to still picture.

To resume normal playback, press PLAY.

13

Variable-Speed Search

	ACTIVATE VARIABLE-SPEED
1	SEARCH
	During playback, press @or #.
	● The more times you press, the faster the playback
	picture moves.
	● To decrease speed, press the button for the opposite
	direction.

To resume normal playback, press PLAY.

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still picture, press FF for forward high-speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, press and hold FF or REW during playback or still picture. When released, normal playback resumes.