36ADVANCEDOPERATIONS(cont.)

Repeat Playback

–:–

1 2 3

2

4 5 6

7 8 9

4

0

1

LAY

?

Your video recorder can automatically play back the whole tape 100 times repeatedly.

1

START PLAYBACK

Press PLAY.

2

ACTIVATE REPEAT PLAYBACK

Press PLAY and hold for over 5 seconds, then release.

 

The Play indicator ( ) on the display panel blinks

slowly.

 

The tape plays 100 times automatically, and then

 

stops.

REW

STOP

FF

PAUSE

STOP PLAYBACK

3 Press STOP at any time to stop playback.

3

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

1

2

LOAD A CASSETTE

Insert a cassette recorded in NTSC.

START PLAYBACK

Press PLAY.

"NTSCPAL" appears on the screen for about 5 seconds.

Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

The counter and tape remaining time readings will be incorrect.

During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

Page 36
Image 36
JVC HR-J670EK, HR-J672EK, HR-J470EK, HR-J270EK setup guide Ntsc Playback, Activate Repeat Playback