Diagram 5: WDS Bridge mode application
When you select ‘AP
Here are descriptions of every setup item:
Band | Please select the wireless band you wish to use. By selecting |
| different band setting, you’ll be able to allow or deny the wireless |
| client of a certain band. |
| If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless |
| clients using the wireless band you select (802.11b, 802.11 |
| or 802.11g) will be able to connect to this access point. |
| If you select 2.4GHz (B+G), then only wireless clients using 802.11b |
| and 802.11g band will be able to connect to this access point. |
| If you want to allow 802.11b, 802.11g, and 802.11 |
| connect to this access point, select 2.4GHz (B+G+N). |
|
|
MAIN ESSID | Please input the ESSID (the name used to identify this wireless |
| access point) here. You can input up to 32 alphanumerical |
| characters. PLEASE NOTE THAT ESSID IS CASE SENSITIVE. |
|
|
Multiple ESSID | The access point supports multiple SSID function; up to 3 SSIDs can |
| be set. If you want to configure additional SSIDs, please click this |
| button. For detailed descriptions of the function, please refer to |
| Section 2.4.1.1. |
|
|
Channel | Please select a channel number you wish to use. The channel |
Number | number must be same with another wireless access point you wish to |
| connect. |
|
|
| 30 |
