Airlink101 N300 user manual 4 802.1x Authentication, MD5/PEAP Radius

Here are descriptions of every setup item:

WPA Unicast Cipher	You can select WPA encryption type here. AES is safer than TKIP,
Suite	but not every wireless client supports it. Please refer to the
	specification of your wireless client to decide which encryption type
	you should use.
Use internal	Uses built-in RADIUS Server (refer to Section 2-8) instead of external
MD5/PEAP RADIUS	RADIUS server. If you check this box, the value in following three
Server	fields will be ignored.
RADIUS Server IP	Please input the IP address of RADIUS authentication server here.
address
RADIUS Server Port	Please input the port number of RADIUS authentication server here.
	Default value is 1812.
RADIUS Server	Please input the password of RADIUS authentication server here.
Password

2.5.4 802.1x Authentication

You can enable 802.1x user identification (based on RADIUS user authentication server) by checking ‘Enable 802.1x Authentication’ box when you select ‘Disable’ or ‘WEP’ as encryption type, and the following page will be displayed:

38