![](/images/new-backgrounds/1120185/12018573x1.webp)
Here are descriptions of every setup item:
Key Length | There are two types of WEP key length: |
| |
| performance. |
|
|
Key Format | There are two types of key format: ASCII and Hex. When you select |
| a key format, the number of characters of key will be displayed. For |
| example, if you select |
| you’ll see the message at the right of ‘Key Format’ is ‘Hex (10 |
| characters), which means the length of WEP key is 10 characters. |
|
|
Default Tx Key | You can set up to four sets of WEP key, and you can decide which |
| key is being used by default here. If you don’t know which one you |
| should use, select ‘Key 1’. |
|
|
Encryption Key 1 to 4 | Input WEP key characters here, the number of characters must be |
| the same as the number displayed at ‘Key Format’ field. You can use |
| any alphanumerical characters |
| ‘ASCII’ key format, and if you select ‘Hex’ as key format, you can use |
| characters |
| key here, and if you entered multiple WEP keys, they should not be |
| same with each other. |
|
|
Enable 802.1x | Check this box to enable 802.1x user authentication. Please refer to |
Authentication | Section |
|
|
| 36 |