Airlink101 N300 user manual

Wi-Fi Protected	All information related to WPS will be displayed here, they’re helpful
Setup Information	when you’re setting up connections by WPS.
	WPS Status: Displays WPS status. If data encryption settings of this
	access point has never been set, ‘unConfigured’ message will be
	displayed her. (see Section 2-7 for detailed information); if data
	encryption settings has been set before, ‘Configured’ message will be
	displayed here.
	Self PinCode: This is the WPS PIN code of this access point. This
	code is useful when you need to build wireless connection by WPS
	with other WPS-enabled wireless devices.
	SSID: Displays the SSID (ESSID) of this access point.
	Authentication Mode: The wireless security authentication mode of
	this access point will be displayed here. If you don’t enable security
	function of the access point before WPS is activated, the access point
	will auto set the security to WPA (AES) and generate a set of
	passphrase key
	for WPS connection.
	Passphrase Key: Displays the WPA passphrase here, all characters
	will be replaced by asterisk for security reason. If encryption is not set
	on this access point, nothing will be displayed here.
Config Mode	There are ‘Registrar’ and ‘Enrollee’ modes for the WPS connection.
	When ‘Registrar’ is enabled, the wireless clients will follow the access
	point’s wireless settings for WPS connection. When ‘Enrolle’ mode is
	enabled, the access point will follow the wireless settings of wireless
	client for WPS connection.
Start PBC	Click ‘Start PBC’ to start Push-Button style WPS setup procedure.
	This access point will wait for WPS requests from wireless clients for 2
	minutes. The ‘WLAN’ LED on the access point will be steady on for 2
	minutes when this access point is waiting for incoming WPS request.
Start PIN	Please input the PIN code of the wireless client you via client wish to
	connect, and click ‘Start PIN’ button. The ‘WLAN’ LED on the access
	point will be steady on when this access point is waiting for incoming
	WPS request.

NOTE: When you’re using PBC type WPS setup, you must press ‘PBC’ button (hardware or software) of wireless client within 120 seconds; if you didn’t press PBC button of wireless client within this time period, please press ‘PBC’ button (hardware or software) of this access point again.

45