Here are descriptions of every setup item:
Band | Please select the wireless band you wish to use. By selecting different |
| band setting, you’ll be able to allow or deny the wireless client of a |
| certain band. |
| If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless |
| clients using the wireless band you select (802.11b, 802.11 |
| 802.11g) will be able to connect to this access point. |
| If you select 2.4GHz (B+G), then only wireless clients using 802.11b |
| and 802.11g band will be able to connect to this access point. |
| If you want to allow 802.11b, 802.11g, and 802.11 |
| connect to this access point, select 2.4GHz (B+G+N). |
|
|
Main ESSID | Please input the ESSID (the name used to identify this wireless |
| access point) here. You can input up to 32 alphanumerical characters. |
| PLEASE NOTE THAT ESSID IS CASE SENSITIVE. |
|
|
Site Survey | When you use this access point as a wireless station for Ethernet |
| network device to have wireless capability, you have to associate it |
| with a working access point. Click ‘Select Site Survey’ button, then a |
| “Wireless Site Survey Table” will pop up. It will list all available access |
| points near by. You can select one access point in the table and it will |
| join wireless LAN through this access point. Please go to Section |
| 2.4.2.1 for more information about the ‘Wireless Site Survey Table’. |
|
|
After you finish with setting, please click ‘Apply’, and the following message will be displayed: After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous | setup page to continue on other setup |
23
