Associated Clients | Click ‘Show Active Clients’ button and a new popup window will |
| appear which contains the information about all wireless clients |
| connected to this access point. You can click ‘Refresh’ button in |
| popup window to keep information |
|
|
MAC address 1~4 | Please input the MAC address of the wireless access point you wish |
| to connect. |
|
|
Set Security | Click this button to select an encryption mode for this wireless link, a |
| popup window will appear. Please refer to Section 2.5 for detailed |
| descriptions. |
|
|
After you finish with setting, please click ‘Apply’, and the following message will be displayed: After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait for 30 seconds while router is rebooting).
2.4.6 Universal Repeater
In this mode, the access point can act as a wireless repeater; it can be Station and AP at the same time. It can use Station function to connect to a Root AP and use AP function to service all wireless stations within its coverage.
31
