Here are descriptions of every setup item:
Band | Please select the wireless band you wish to use. By selecting |
| different band setting, you’ll be able to allow or deny the wireless |
| client of a certain band. |
| If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless |
| clients using the wireless band you select (802.11b, 802.11 |
| or 802.11g) will be able to connect to this access point. |
| If you select 2.4GHz (B+G), then only wireless clients using 802.11b |
| and 802.11g band will be able to connect to this access point. |
| If you want to allow 802.11b, 802.11g, and 802.11 |
| connect to this access point, select 2.4GHz (B+G+N). |
|
|
Channel | Please select a channel number you wish to use. The channel |
Number | number must be same with another wireless access point you wish to |
| connect. |
|
|
MAC address 1~4 | Please input the MAC address of the wireless access point you wish |
| to connect. |
|
|
Set Security | Click this button to select an encryption mode for this wireless link, a |
| new popup window will appear. Please refer to Section |
| detailed descriptions. |
|
|
After you finish with setting, please click ‘Apply’, and the following message will be displayed: After you clicked Apply, the following message will be displayed on your web browser:
28