Here are descriptions of every setup item:
Use internal | Uses |
MD5/PEAP RADIUS | of external RADIUS server. If you check this box, the value |
Server | of internal RADIUS server fields will be ignored. |
|
|
Enable 802.1x | Enable or disable the use of 802.1x user authentication. |
Authentication |
|
|
|
RADIUS Server IP | Please input the IP address of RADIUS authentication |
address | server here. |
|
|
RADIUS Server Port | Please input the port number of RADIUS authentication |
| server here. Default value is 1812. |
|
|
RADIUS Server | Please input the password of RADIUS authentication |
Password | server here. |
|
|
After you finish with setting, please click ‘Apply’, and the following message will be displayed: After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait for 30 seconds while router is rebooting).
39