JVC HR-J7005UM manual Basic Connections, Installing Your NEW VCR, Back of VCR

4EN

INSTALLINGYOURNEWVCR

Basic Connections

ANT. IN

Connect the power plug to an AC outlet before installing the lithium battery. (See below)

AC Outlet

AC Power Cord

Antenna or Cable

Coaxial Cable

Flat Feeder

Matching Transformer (not supplied)

(Antenna or Cable input)

PAUSE/		IN	. IN
AV
COMPU			R
-LINK
AUDIO
			L
VIDEO			RF OUT
CH3	CH4

Back of VCR

RF OUT

Back of VCR

VIDEO
CH3	CH4

TV

Audio/Video Cable (not supplied)

RF Cable (supplied) 75 ohm terminal

300 ohm terminal

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the VCR power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A