JVC HR-J730KR manual Data, Engage Timer Mode

PRESS (8=DAILY, 9=WEEKLY SP/EP=REC SPEED)

PRESS (MENU) TO END

OK	MENU
	6
	q

CH

					31
4	CHECK INPUT DATA
	Press OK and the Program		PROGRAM 1
	screen appears.
			(G-CODE 12345678)
	The G-Code number you	START	8:00 PM
		DATE	7/10 WED
	entered appears in the	STOP	9:00 PM
	Program screen. Check to
		CHANNEL		8 SP
	make sure it’s accurate.

● To timer-record daily or weekly serials, press DAILY (NUMBER “8”) or

WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen.

●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the G-Code screen, input the correct G-Code number.

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0 – 9), CANCEL and MENU.

1

NUMBER 4

7

2 3

5 6

8 9

NUMBER "9"

SET TAPE SPEED

5 Press SP/EP.

CHECK/CORRECT INPUT

DATA

0

TIMER

If the data is correct as it is, go to step 7. If not, press

NUMBER "8"

CH

OK or PUSH JOG ª£ until the item you want to

6 change begins to blink. Then press the appropriate

NUMBER keys, CH5° or PUSH JOG 5° to obtain

the desired setting.

● If you are using the Illumi-Guide feature, OK blinks

SP/EP

OK

MENU

PUSH JOG

	when the following buttons are lit: NUMBER keys
	(0 – 9), CANCEL and MENU.
	RETURN TO NORMAL
7	SCREEN
	Press MENU as many times as necessary.
	● Press just once to access the Auto Timer screen
	(☞ pg. 36).
	● If you are using the Illumi-Guide feature, all buttons
	go out.
	ENGAGE TIMER MODE
8 Press TIMER. The VCR turns off automatically.

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for 18 hours.

●Backup time becomes shorter as the unit's internal parts become old. When this occurs, please consult your nearby JVC dealer.