OK | MENU |
6
q
CH
| 1 | 2 | 3 | |
NUMBER | 4 | 5 | 6 | |
|
|
| NUMBER "9" | |
| 7 | 8 | ||
| 9 | |||
|
|
| 0 | TIMER |
|
|
|
| |
| NUMBER | "8" |
| CH |
|
|
| ||
|
|
|
| |
OK
MENU
PUSH JOG
5
6
7
33
SET PROGRAM
INFORMATION
Press the appropriate NUMBER keys to set the date, start/stop time and channel number. Press CH5° or PUSH JOG 5° to set AM/PM and tape speed. Press OK after AM/PM, channel number and tape speed settings. The next setting that can be set begins flashing.
●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.
●It is possible to set all information using the CH5° or PUSH JOG 5° button.
(In this case, press OK after each setting.) Do not use the CH ° or PUSH JOG ° button to set the date.
●If you are using the
**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears.
MAKE CORRECTIONS
To change any of the settings, press OK or PUSH JOG
ª£until the item you want to change begins blinking. Then set as in step 5.
●If you are using the
– 9), PUSH JOG, CANCEL and MENU.
RETURN TO NORMAL SCREEN
Press MENU as many times as necessary.
●Press just once to access the Auto Timer screen (☞ pg. 36).
●If you are using the
ENGAGE TIMER MODE
EXAMPLE
If you program the VCR to timer record a show on September 6 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:
PROGRAM 1
DATE | 9/ 6 FRI |
START | 12:00 PM |
STOP | 1:00 PM |
CHANNEL | 40 SP |
PRESS NUMBER
PRESS (MENU) TO END
8
Press TIMER. The VCR turns off automatically.
NOTES:
●To disengage the timer before recording starts, press TIMER again. Pressing once more
●In case of a power failure after programming, the VCR’s memory backup keeps your selections for 18 hours.
●Backup time becomes shorter as the unit's internal parts become old. When this occrs, please consult your nearby JVC dealer.
●If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.
●If you enter a start time that has already passed, "ERROR" appears on the screen and flashes.
●Programs that start after midnight must have the next day’s date.
●After timer recording is completed, the VCR’s power goes off automatically.
●You can program the timer while a regular recording is in progress; the
●If the end of tape is reached during timer recording, the cassette is automatically ejected.
