^STANDBY/ON 
Button — same as button on recorder.
&AUDIO Button changes output sound mode. ☞ pg. 25
(TV Muting) Button mutes sound of connected TV. ☞ "Operating JVC TVs" in the right column.
*–
*Preset position is not displayed during playback.
(DAILY Button enables timer recording of daily serials. ☞ pg. 17, 19
)WEEKLY Button enables timer recording of weekly serials. ☞ pg. 17, 19
qAUX Button selects recorder's auxiliary input mode. ☞ pg. 30, 31
wä(TIMER) Button — same as button on re- corder. ☞ pg. 17, 19
eDATE +/– Button inputs date of programme for timer recording. ☞ pg. 18
rPR +/– Button — same as button on recorder. ☞ pg. 14
tAuto Tracking Button (
) enables/disables auto tracking mode during playback ☞ pg. 28 SP/LP Button selects tape speed. ☞ pg. 14
y30 SEC Button initiates a
uPlay Button — same as button on recorder. ☞ pg. 12, 13
iFast Forward [FF] Button fast-forwards tape;
initiates forward
oPause Button — same as button on recorder. ☞ pg. 13, 14
pOK Button enters selections made in
Q @ #Button initiates functions such as Index Search ☞ pg. 24,
TV 
+/– Button controls volume of connected TV. ☞ "Operating JVC TVs" in the right column.
55
How To Use
The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. (See below.)
●Point the remote control toward the sensor window.
●The maximum operating distance of the remote control is about 8 m.
Operating JVC TVs
To operate your TV, while holding down the TV button, press the corresponding button: STANDBY/ON 
, TV/
VCR, TV PR +/–, TV 
+/–, 
(TV Muting).
NOTES:
●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
●Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control.
●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.
