Edit From Camcorder, SET RECORDER’S Input Mode | JVC HR-J770EK

30ADVANCEDOPERATIONS(cont.)

Edit From

A Camcorder

– –:– –

1 2 3

2

4 5 6

7 8 9

4

AUX0

PR

1 ?

You can use a camcorder as the source player and your video recorder as the recorder.

MAKE CONNECTIONS

1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s front panel AUDIO/VIDEO input connectors.

● When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.

SET RECORDER’S INPUT MODE

2 Press AUX and/or PR so that “F-1” appears in place of a preset position number.

SET EDIT MODE

3 See "Picture Control" on page 29.

START CAMCORDER

4 Engage its Play mode.

START RECORDER

5 Engage its Record mode.

NOTES:

● All necessary cables can be obtained from your dealer.

● You can also use another video recorder as the player instead of a camcorder.

● When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")

Recorder

after you finish dubbing the tapes.

– –:– –

VIDEO	AUDIO input
input

	VIDEO OUT	Audio/Video Cable
	VIDEO OUT	(not provided)
		(not provided)
	Camcorder
	AUDIO OUT

Player

Image 30

JVC HR-J770EK setup guide Edit From Camcorder, SET RECORDER’S Input Mode, SET Edit Mode, Start Camcorder, Start Recorder

Contents

HR-J770EK Safety Precautions Do not place the recorder Some Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide TV Aerial Cable not provided To connect to a TV with 21-pin AV input connector ScartBack of TV Back of Recorder Refer to Before performing the following procedure, make sure thatAuto for Auto Set Up function Tion pg and the TV is turned on, Progress, this process will be interrupted Or remote control until the display panelShows either the display as illustrated on You will need to start again. See Notes below If auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failed Turn on the Recorder TV Auto Power OnLink Functions NexTView Link Satellite Receiver Control Setting Access SAT Control SET Screen Enter Satellite RECEIVER’S BrandCheck Result of Test Find Programme Start Point PlaybackLoad a Cassette Start Playback Pause During Playback Activate HIGH-SPEED Search Recording Engage ITR Mode Select Preset to WatchReset Counter SET Counter Display Access Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode Number Timer Warning PDC Recording Enter Programme Start Time Express Timer ProgrammingBefore performing Express Timer Programming Time Return to Normal SET PDC ModeTimer Mode Engage RECORDER’S Return to Timer Mode Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Normal SCREEN/ Display To cancel a programme When programmes overlap each otherCancel or Change Programme Setting Confirm Overlapping Programmes Playback/ Recording According To Tape Charac- teristics S.T. Picture System Recording PlaybackOr press Record on the recorder Sections Looking For Scene You WantSkip Over Unwanted Activate Index Search Soundtrack Selection Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes During Playback Satellite Receiver Unit Aerial Pin AV input Connector ScartAutomatic Satellite Programme Recording TV Aerial cable Access Main Menu Screen Override Automatic Tracking Playback Picture AdjustmentAdjust Tracking Manually Select Picture Control SET Mode Access Main Menu ScreenAccess Mode SET Screen Minimizing Picture Degradation While Editing Edit From Camcorder SET RECORDER’S Input ModeSET Edit Mode Start Camcorder SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source Player Select Setting To the AV2 L-2 IN/DECODER connectorOff. pg ENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display Power Save Mode Power SAVE, then press Auto Timer Auto SP→LP TimerNext Function Memory Repeat Playback Ntsc PlaybackActivate Repeat Playback Connection To Stereo System Audio Cable not provided Speaker Clock Set Just Clock Video Plus+ Setup NumberGuide Program Number Set Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video Channel With RF Connection Tuner Set Perform Auto Channel SETAuto Channel Set After Scan Completed Screen preset positionsProcedures Is displayed on the screen Input Channel Storing Channels ManuallySelect Band Enter NEW Channel Information Fine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a Channel Channel SET Screen Access ManualSwitch Stations Select NEW Station TV Station And ID List TV Station Channel Number Guide Questions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Timer Recording Won’t stop Index Front View Programme Time Indicators show the programme Audio OUT L/R Connectors enableSymbolic Mode Indicators Tape Speed Indicators display mode of recording light Remote Control Fast Forward FF Button fast-forwards tape VCR, TV PR +/-,TV +/-, TV Muting DA4 Double Azimuth helical J770EKMaximum recording time VHF 44.5 143/143 470 MHz