JVC HR-J795EK manual Choose a Programme, Set the Tape Speed, Start Recording

18

basic features

Recording

TV signals being received by the recorder’s built in tuner can be recorded onto a video tape. You can ‘capture’ a TV programme using your VCR.

before you start

Turn the TV on

Tune the TV to your Video Channel or to its AV mode

Choose a blank cassette which has the record safety tab still in place

Record

Safety Tab

Load the cassette into the VCR (see page 14)

1 PROG	?				30 SEC
	ENTE
			R/EN
					TR
MENU			3	OK		EE
	TV PR
			+
	TV
		TV/VCR	AUDIO		– –:– –
	1		2		3
						2
	4		5		6
	VPS/PDC	DAILY/QTDN. WEEKLY/HEBDO
	7		8		9
	0000	AUX				4
			0
	START	STOP	DATE		PR
	DEBUT	FIN
		EXPRESS
	1 PROG	?			30 SEC
			ENTER/ENTREE
	MENU			3	OK
		TV PR		+
	T				+
	V
	–				TV
		TV PR		–

TE PR

Choose a Programme

There are two ways to select a preset position of the VCR.

method one Press PR +/– or the number keys on the Remote Control to select the channel that you wish to record.

method two Push the center part of the JOG Dial so that the preset position appears on the TV screen. While the display is shown, turn the JOG Dial to the right or left.

Set the Tape Speed

Press /• The current setting for the tape speed appears on the on-screen display or the VCR display panel for about 5 seconds. Press /again to change the setting while tape speed is displayed. You can choose Standard Play (SP) or Long Play (LP). The picture quality on LP recordings will not be as high as on SP recordings, but the tape will last longer.

Start Recording

There are two ways to start recording:

method one Press and hold Tand then press .on the Remote Control.

method two Press Ton the VCR.

When “DIRECT REC” is set to “ON” (☞pg. 35), if you press any button just after pressing Ton the VCR (or Tand .on the Remote Control), the recorder may not function properly.

Pause and Resume During Recording

On either the VCR or the Remote Control, press to temporarily stop recording and press .to resume. You cannot change the preset position on the VCR while it is recording but you can while it is paused (see Choose a Programme at the top of this page).