JVC HR-S5990AM, HR-S5900AM Activate Repeat, Playback, Access Main Menu Screen, SET Mode

Repeat Playback

Your video recorder can automatically play back the whole tape 100 times repeatedly.

1	START PLAYBACK
	Press PLAY.
	ACTIVATE REPEAT
2	PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
	● The Play indicator ( ) on the display panel blinks
		slowly.
	● The tape plays 100 times automatically, and then
		stops.
3		STOP PLAYBACK
	Press STOP at any time to stop playback.

NOTES:

●Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.

●Repeat Playback is not possible with a PAL tape recorded in EP mode.

EN17

Video Stabilizer

You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another recorder.

* The default setting is "OFF".

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Press PUSH JOG %fi to	MAIN MENU
	place the pointer next to	PROGRAMME NAVIGATION
	"FUNCTION SET", then
		FUNCTION SET
	press OK or PUSH JOG #.	TUNER SET
		INITIAL SET
		[5/∞] =
		[MENU] : EXIT
	SELECT VIDEO STABILIZER
3	SET MODE
	Press PUSH JOG %fi to
	place the pointer next to	PREVIOUS PAGE
	then	PROG. NAVIGATION	ON
	"VIDEO STABILIZER", #	AUTO SP=LP TIMER	OFF
	press OK or PUSH JOG	VIDEO STABILIZER	ON
	to select "ON" or "OFF".	S-VHS	ON
		S-VHS ET	OFF
		[5/∞] =
		[MENU] : EXIT
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTES:

●When you finish viewing a tape, be sure to set this function to "OFF".

●Regardless of the setting, this function has no effect during recording and during special effects playback.

●The on-screen display may jitter vertically when this function is set to "ON".

●To watch recordings with close-caption, set this function to "OFF".