EN
35
When programmes overlap each other
If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.
DAILY
STOP+/–
START+/–
WEEKLY
PR +/–
DATE+/ – SP/LP/EP
OK
PUSH JOG
| PR START | STOP | CH | DATE | |
PROGRAM OVERLAPPED | 1 | 8:00 | 10:00 | 3 | 24.04 |
2 | 10:00 | 10:45 | 2 | 25.04 | |
| 3 | 11:30 | 13:00 | 1 | 25.04 |
| 4 | 9:00 | 10:00 | 92 | DAILY |
| 5 |
|
|
|
|
| 6 |
|
|
|
|
| 7 |
|
|
|
|
| 8 |
|
| [PROG] : EXIT | |
| [5/∞] = |
| |||
Example: Programme 1 (you have just made) and Programme 4 overlap each other.
CONFIRM THE
OVERLAPPING
PROGRAMMES
1Overlapping programmes blink on the TV screen.
SELECT THE PROGRAMME TO MODIFY
2Press PUSH JOG %fi, then press OK or PUSH JOG #.
●You can only select one of the overlapping programmes.
NOTE:
If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the recorder will return to the normal screen.
CANCEL OR CHANGE
PROGRAMME SETTING
3To cancel a programme, press 
when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.
To change a programme, press the appropriate button:
WEEKLY and/or SP/LP/EP (
) when the Programme screen on which you want to make changes is shown, then press OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.
NOTE:
If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.
