JVC HR-S5900AM, HR-S5990AM Turn on Unit, SET Brand Code, Operate Unit, Special Features

44EN

SPECIALFEATURES(cont.)

V CABLE/SAT/DVD

VCR

NUMBER

LAY

FF

REW

PAUSE

STOP

OK

TV PR+/–

@#+/–

ATTENTION

The remote control can operate not only the video recorder but also some of your TV, cable box, satellite receiver and DVD.

●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.

●To operate your TV, first press the TV button to set the remote control to the TV mode.

●To operate your satellite receiver, cable box or DVD, first press the CABLE/SAT/DVD to set the remote control to the satellite receiver, cable box or DVD mode.

Multi-brand Remote Control

For satellite receiver, cable box and DVD

Your remote control can operate the basic functions of your satellite receiver, cable box or DVD.

TURN ON UNIT

1Turn on the cable box, satellite receiver or DVD using the Power button on the unit or its remote control.

2	SET BRAND CODE
	21Press and hold CABLE/SAT/DVD.
	3code.Press the NUMBER keys to enter your unit’s brand
	Press OK, and release CABLE/SAT/DVD. Check if
	the unit's power goes off as it should. If it does, try
	other operations ( step 2).
	● Once you have set the remote control to operate the
	unit, you don't have to repeat this step until you
	replace your remote control's batteries.
	● Some brands have more than one code. If the unit
	does not function with one code, try entering another.

OPERATE UNIT

3First, press CABLE/SAT/DVD to set the remote control to cable box, satellite receiver or DVD mode, then press one of the following buttons:

For satellite receiver and cable box . . .

, TV PR +/–,NUMBER keys. For DVD. . .

, PLAY, STOP, PAUSE, FF, REW, @ # (4¢) keys.

●For some brands, you must press OK after having pressed the NUMBER keys to enter a channel number.

●To change the unit’s channels, press TV PR+/– or the NUMBER keys. (The PR+/– button can be used to change the recorder’s channels only.)

IMPORTANT

Although the provided remote control unit is compatible with JVC satelite receiver and DVD, as well as many other models, it may not work with your unit, or in some instances, may have limited function capability.

NOTES:

●It's not possible to set the two units at the same time. You can only set the remote control to operate one of these units at a time.

●You have to subscribe to a satellite or cable service to receive satellite or cable channels.