JVC HR-S5990AM, HR-S5900AM specifications Access Title Edit Screen, Engage Recorders Timer Mode

NUMBER

WEEKLY

STOP+/–

PROG

OK

PUSH JOG

Satellite Tuner Users

To timer-record a satellite broadcast using the G-CODEsystem:1

2Perform steps 1 – 8.

Set the satellite tuner to the appropriate channel before

3the selected programme begins. Leave the satellite tuner's power on.

ATTENTION

Regarding Guide Program Number Set

"G-CODE/SHOWVIEW SETUP" appears after performing step 3 if the Guide Program number for the G-CODEnumber you entered has not been set.

●Press the NUMBER keys or PUSH JOG %fi to input the

channel position number on which your recorder receives that station, then press OK or PUSH JOG %. The G-CODEprogram screen appears.

G-CODE/SHOWVIEW SETUP		(Ex.) To timer-record a RTR
GUIDE PROG	TV PROG	programme with the G-CODE
		system.
2	– –	* If your recorder receives

	RTR on the channel position
[0-9] OR [5/∞]:SELECT =	2, press OK or PUSH JOG %
[PROG] : EXIT	after entering "2".

EN29

ACCESS TITLE EDIT SCREEN

	Press the NUMBER key	– P1 –
	“1”. The Title Edit screen
5 appears.		25.04 21:00	PR.1

● You can access the Title

Edit screen only when	[0–9] : SELECT LETTERS
“PROG. NAVIGATION”	[		] : DELETE
	[	2	3		+=
is set to “ON”. ( pg.			/ ] : CURSOR
			: OK	[PROG] : EXIT
38)

ENTER PROGRAMME TITLE
Press the NUMBER keys		– P1 –
and PUSH JOG # to enter
6 characters, then press OK	25.04	W 7
For details, refer to
“Entering Character” on	[0–9] : SELECT LETTERS
page 41.
	[ ] : DELETE
	[2/3] : CURSOR+=
	: OK	[PROG] : EXIT

RETURN TO NORMAL

SCREEN

7Press PROG or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. If “PROGRAM OVERLAPPED” appears on the screen and “Err” on the display panel, see page 35.

● Repeat steps 1 – 7 for each additional programme.

ENGAGE RECORDER'S

TIMER MODE

8Press ‰. The recorder turns off automatically and "‰" appears on the display panel.

● To disengage the timer, press ‰ again.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.

●To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key "9") for weekly serials or DAILY (NUMBER key "8") for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen. To record the extra programme, you must first cancel any unnecessary programmes ( pg. 34).

●It is not possible to timer-record a TV programme with a G-CODEnumber which starts with "0".

●In case of a power failure after programming, the recorder's memory backup keeps your selections (if the lithium battery is not exhausted).