Safety Precautions | JVC HR-S6711EU specification

2 EN	SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on page 2 and 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

●Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

●SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

JVC HR-S6711EU specifications Safety Precautions

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVs Connect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mains To connect to a TV with S-VIDEO/AUDIO in connectors Video Connection Turn on the recorder Auto Set Up10 EN Select your country Press rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or e Set the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Language Access the Main Menu screenAccess the Country Set screen 14 EN Attach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connections Setting satellite receivers brand and channel 16 EN VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 18 EN Pause during playback Slow MotionVariable Speed Search Activate frame-by-frame playback High-Speed Turbo Search 20 ENSkip Search Instant ReView Manual Tracking Index SearchNext Function Memory Soundtrack Selection 22 ENRepeat Playback Activate Repeat Playback Set the tape speed Recording Resume FunctionChoose a programme Start recording 24 EN Instant Timer Recording ITREngage the ITR mode Watching Another Tape Remaining Time Reset the counterEngage the S-VHS ET mode Set the counter display Receiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being Received Playback Recording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 EN Satellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number Set Express Timer Programming 30 EN Enter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+ 32 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screen Programme Recording Select the L-2 Select modeRecording mode 34 EN Edit From a Camcorder Highlight bar pointer to Access the Output/Input Set screenPress rt to move OUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connector Another Video Recorder 38 EN Your recorder Recorder Connecting To a Satellite Receiver Simple Connections Perfect Connections Connect the decoder Select the input mode42 EN Set the tuner Connecting/Using a Stereo System Make connections Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is 46 EN For Example About Ntsc Playback 48 EN Access the Auto Channel Set screenTuner Set Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 50 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 52 ENSet Stations a TV Station And ID List Station Name Video Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 54 EN Guide Program Number Showview SetupGuide Program Number Set Enter the Guide Program number 56 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operation Troubleshooting 58 EN Recording Other Problems 60 EN Playback 62 EN Preset Download Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Timer warning display Tuner Set International telephone Language code Country code