20 EN, Skip Search, High-Speed Turbo Search | JVC HR-S6711EU

20 EN

PLAYBACK (cont.)

Skip Search

During playback, press 30 SEC 1 to 4 times to skip over unwanted sections.

Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

To resume normal playback during a Skip Search, press 4.

High-Speed (Turbo) Search

During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE ring resumes still picture playback.

●For forward high-speed search, turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse high-speed search, turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

During playback or still, press 5for forward high-speed search, or 3for reverse high-speed search.

NOTE:

For short searches, press and hold 5or 3for over 2 seconds during playback or still picture. When released, normal playback resumes.

To resume normal playback, press 4.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

Activate Instant ReView.

Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and “3” appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on

the front display panel after Automatic Satellite Programme Recording ( pg. 34).

Image 20

JVC HR-S6711EU specifications 20 EN, Skip Search, High-Speed Turbo Search, Activate Instant ReView

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVs Check the contents Situate the recorderConnect the recorder to TV Connect the recorder to mains To connect to a TV with S-VIDEO/AUDIO in connectors Video Connection Auto Set Up 10 ENTurn on the recorder Select your country Perform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or e Perform Preset Download 12 ENSet the video channel Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Access the Main Menu screen Access the Country Set screenLanguage 14 EN Installing Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connections Setting satellite receivers brand and channel 16 EN VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 18 EN Slow Motion Variable Speed SearchPause during playback Activate frame-by-frame playback 20 EN Skip SearchHigh-Speed Turbo Search Instant ReView Manual Tracking Index SearchNext Function Memory 22 EN Repeat PlaybackSoundtrack Selection Activate Repeat Playback Recording Resume Function Choose a programmeSet the tape speed Start recording Instant Timer Recording ITR Engage the ITR mode24 EN Watching Another Reset the counter Engage the S-VHS ET modeTape Remaining Time Set the counter display Receiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being Received Playback Recording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 28 EN Set the VPS/PDC mode Engage the recorder’s timer modeSatellite Receiver Users Guide Program Number Set Express Timer Programming 30 EN To Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+ 32 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screen Select the L-2 Select mode Recording modeProgramme Recording 34 EN Edit From a Camcorder Access the Output/Input Set screen Press rt to moveHighlight bar pointer to OUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connector Another Video Recorder 38 EN Your recorder Recorder Connecting To a Satellite Receiver Simple Connections Perfect Connections Select the input mode 42 ENConnect the decoder Set the tuner Connecting/Using a Stereo System Make connections Mode Set Access the Mode Set screenSelect the mode Select the mode setting You can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is 46 EN For Example About Ntsc Playback Access the Auto Channel Set screen Tuner Set48 EN Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 50 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 52 ENSet Stations a TV Station And ID List Station Name Access the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 54 EN Showview Setup Guide Program Number SetGuide Program Number Enter the Guide Program number 56 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operation Troubleshooting 58 EN Recording Other Problems 60 EN Playback 62 EN Auto Channel Set Auto Set Up Connecting To a Satellite Receiver Delete a ChannelPreset Download Timer warning display Tuner Set International telephone Language code Country code