62 EN | JVC HR-S6711EU specification

62 EN

SPECIFICATIONS

GENERAL

Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on	: 23 W
Power off	: 5.2 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)
	: 400 mm x 94 mm x 344 mm
Weight	: 4.1 kg
Format	: S-VHS/VHS PAL standard
Maximum recording time
(SP)	: 240 min. with E-240 video cassette
(LP)	: 480 min. with E-240 video cassette

VIDEO/AUDIO

Signal system	: PAL-type colour signal and CCIR
	monochrome signal, 625 lines 50
	fields
Recording system	: DA4 (Double Azimuth) head helical
	scan system
Signal-to-noise ratio: 45 dB
Horizontal resolution
	: 250 lines (VHS)
	400 lines (S-VHS)
Frequency range	: 70 Hz to 10,000 Hz (Normal audio)
	20 Hz to 20,000 Hz (Hi-Fi audio)
Input/Output	: 21-pin SCART connectors:
	IN/OUT x 1, IN/DECODER x 1
	RCA connectors:
	VIDEO IN x 1, AUDIO IN x 1,

AUDIO OUT x 1

S-Video connectors:

IN x 1, OUT x 1

TUNER/TIMER

TV channel storage capacity

	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 47 MHz – 89 MHz/
	104 MHz – 300 MHz/
	302 MHz – 470 MHz
	UHF 470 MHz – 862 MHz
Aerial output	: UHF channels 22 – 69 (Adjustable)

Memory backup time

: Approx. 60 min.

ACCESSORIES

Provided accessories

:RF cable,

Satellite Controller RM-SD1, Infrared remote control unit, “R6” battery x 2,

S-VHS ET labels

Specifications shown are for SP mode unless otherwise specified. E.& O.E. Design and specifications subject to change without notice.

Image 62

JVC HR-S6711EU specifications 62 EN

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVs Connect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mains To connect to a TV with S-VIDEO/AUDIO in connectors Video Connection Turn on the recorder Auto Set Up10 EN Select your country Press rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or e Set the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Language Access the Main Menu screenAccess the Country Set screen 14 EN Attach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connections Setting satellite receivers brand and channel 16 EN VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 18 EN Pause during playback Slow MotionVariable Speed Search Activate frame-by-frame playback High-Speed Turbo Search 20 ENSkip Search Instant ReView Manual Tracking Index SearchNext Function Memory Soundtrack Selection 22 ENRepeat Playback Activate Repeat Playback Set the tape speed Recording Resume FunctionChoose a programme Start recording 24 EN Instant Timer Recording ITREngage the ITR mode Watching Another Tape Remaining Time Reset the counterEngage the S-VHS ET mode Set the counter display Receiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being Received Playback Recording Before performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 EN Satellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number Set Express Timer Programming 30 EN Enter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+ 32 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screen Programme Recording Select the L-2 Select modeRecording mode 34 EN Edit From a Camcorder Highlight bar pointer to Access the Output/Input Set screenPress rt to move OUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connector Another Video Recorder 38 EN Your recorder Recorder Connecting To a Satellite Receiver Simple Connections Perfect Connections Connect the decoder Select the input mode42 EN Set the tuner Connecting/Using a Stereo System Make connections Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is 46 EN For Example About Ntsc Playback 48 EN Access the Auto Channel Set screenTuner Set Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 50 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 52 ENSet Stations a TV Station And ID List Station Name Video Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 54 EN Guide Program Number Showview SetupGuide Program Number Set Enter the Guide Program number 56 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operation Troubleshooting 58 EN Recording Other Problems 60 EN Playback 62 EN Preset Download Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Timer warning display Tuner Set International telephone Language code Country code