Express Timer Programming, H Engage recorder’s timer mode

G-CODETM/SHOWVIEWTMTimer Programming

Before performing G-CODE/SHOWVIEWTimer Programming:

●Be sure to read “G-CODETM/SHOWVIEWTMSystem Setup” ( 10).

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system ( 16).

With the G-CODEsystem , timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

HEngage recorder’s timer mode

Press #. The recorder turns off automatically and “#” appears on the display panel.

●To disengage the timer, press # again.

Satellite Tuner Users

To timer-record a satellite broadcast using the G-CODEsystem:

APerform steps 1 – 8.

BSet the satellite tuner to the appropriate channel before the selected programme begins.

CLeave the satellite tuner's power on.

ATTENTION

AAccess G-CODE/SHOWVIEW NO.

screen

Press PROG.

BEnter G-CODEnumber

Press the number keys to enter the G-CODEnumber of a programme you wish to record.

●If you make a mistake, press & and input the correct number.

G-CODE/SHOWVIEW NO.

[0-9]

[+/–] : EXPRESS PROGRAMING

[PROG] : EXIT

G-CODE/SHOWVIEW NO.

1 2 3 4 5 6 7 8

[0-9] [&] : DELETE [PROG] : EXIT

Regarding Guide Program Number Set

“G-CODE/SHOWVIEW SETUP” appears after performing step 3 if the Guide Program number for the G-CODEnumber you entered has not been set.

●Press the number keys or PUSH

JOG rt to input the channel	G-CODE/SHOWVIEW SETUP
JOG rt to input the channel
position number on which your	GUIDE PROG	TV PROG
recorder receives that station, then
recorder receives that station, then	2	– –
press OK or PUSH JOG e.
The G-CODEprogram screen
The G-CODEprogram screen	[0-9] OR [R/T]: SELECT
appears.	[MENU] : EXIT
appears.

(Ex.) To timer-record a RTR programme with the G-CODEsystem.

C Enter G-CODEprogramme screen		START	– PI –
Press OK, and the G-CODEProgramme		START			STOP
	NO. 123456789
screen appears. (If you're just starting
		21:00			22:00

out, “P1” appears.)					SP
		DATE			TV PROG
		25.04				1
		: OK		[1] : TITLE

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see “G-CODETM/SHOWVIEWTMSystem Setup” on page 10 and set the Guide Program number for that G-CODEnumber correctly.

●If the number you entered is invalid, “ERROR” appears on the screen. Press & and input a valid G-CODEnumber.

●If the “G-CODE/SHOWVIEW SETUP” screen appears, see “ATTENTION – Regarding Guide Program Number Set” on page 11.

DSet tape speed

Press p to set the tape speed.

E Access title edit screen		– P1 –
Press the number keys “1”. The Title Edit
screen appears.
	25.04	21:00 PR.1

●You can access the Title Edit screen

only when “PROG. NAVIGATION” is	[0-9] : SELECT LETTERS
only when “PROG. NAVIGATION” is	[&] : DELETE
set to “ON”. ( 16)	[Y/U] : CURSOR
	[Y/U] : CURSOR
		: OK	[PROG] : EXIT
F Enter programme title			– P1 –
Press the number keys and PUSH JOG e
to enter characters, then press OK. For
		25.04	W

details, refer to “Entering Character” on
page 15.	[0-9] : SELECT LETTERS
page 15.	[&] : DELETE
G Return to normal screen	[Y/U] : CURSOR
G Return to normal screen		: OK	[PROG] : EXIT
		: OK	[PROG] : EXIT

Press PROG or OK. “PROGRAM

COMPLETED” appears on the screen for about 5 seconds, then normal screen appears. If “PROGRAM OVERLAPPED” appears on the screen and “Err” on the display panel, see page 13.

●Repeat steps 1 – 7 for each additional programme.

*If your recorder receives RTR on the channel position 2, press OK or PUSH JOG e after entering “2”.