JVC LPT0799-001A Automatic Satellite Program Recording, Check, cancel and replace programmes

NOTES:

●If “Err” appears on the display panel, repeat the steps again.

●When a menu screen is shown, you cannot use 24H Express Timer programming function. Press MENU to return to normal screen, and try again.

●You can use 24H Express Timer programming function also when the recorder is turned off.

●For 24H Express Timer programming function, the program overlap warning display does not appear even if some programs overlap each other.

●In case of a power failure after programming, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted).

Check, cancel and replace programmes

ADisengage timer mode

Press #, then press 1.

BAccess Program Check screen

Press ".

C Access Program screen

Press " again to check more information. Each time you press ", the next programme’s information appears.

D Cancel or replace a programme [1] : TITLE

Press & to cancel a programme.

To replace a programme, press the appropriate button: START +/–, STOP+/–, DATE+/–, PR +/–, DAILY, WEEKLY and/or p.

●If you do not want to edit the programme title, skip steps 5 and 6.

E Access title edit screen		– P1 –
Press the number key “1”. The Title Edit
screen appears.	24.12	8:00	PR.3

●You can access the title edit screen only

when “PROG. NAVIGATION” is set to	[0-9] : SELECT LETTERS
	[&] : DELETE
“ON”. ( 16)	[Y/U] : CURSOR
			] : EXIT
	: OK	[
F Enter programme title		– P1 –
Press the number keys and PUSH JOG e
to enter characters, then press OK. For
	24.12	W
details, refer to “Entering character” on
page 15.	[0-9] : SELECT LETTERS
	[&] : DELETE
G Return to normal screen	[Y/U] : CURSOR
	: OK	[	] : EXIT

Press " as many times as necessary. If there are still some programmes remaining, go on to step 8.

HReturn to timer mode

Press #.

When programme overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.

	PR START		STOP	CH	DATE
	1	8:00	10:00	3	24.04
PROGRAM OVERLAPPED	2	10:00	10:45	2	25.04
	3	11:30	13:00	1	25.04
	4	9:00	10:00	92	DAILY
	5
	6
	7
	8

[PROG] : EXIT

Example: Programme 1 (you have just made) and Programme 4 overlap each other.

AConfirm the overlapping programmes

Overlapping programmes blink on the TV screen.

BSelect the programme to modify

Press PUSH JOG rt, then press OK or PUSH JOG e.

●You can only select one of the overlapping programmes.

NOTE:

If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the recorder will return to the normal screen.

CCancel or change programme setting

To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

To change a programme, press the appropriate button: START +/–,STOP+/–,DATE+/–,PR +/–,DAILY, WEEKLY and/or p when the Programme screen on which you want to make changes is shown, then press OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

NOTE:

If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.

Automatic Satellite Program Recording

This facility allows you to automatically record a satellite program which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder's rear AUDIO/VIDEO IN connectors and program the timer on the satellite receiver; the recorder starts recording when the signals input from the satellite receiver to the rear AUDIO/VIDEO IN connectors, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

●Program the timer on the satellite receiver.

●Insert a cassette with the safety tab in place.

ASet tape speed

Press p to set the tape speed.

BEngage Auto Satellite Prog Rec mode

Press and hold REC LINK for about 2 seconds. The REC LINK indicator lights up and the recorder turns off automatically.

●To disengage the Auto Satellite Prog Rec mode, press REC LINK.

●If the recorder's power is off, it is not possible to engage the Auto Satellite Prog Rec mode.

— 13 —