JVC LPT0799-001A Playback Features, Repeat playback, Index search, Activate Index Search

Current position

Index number

Reverse						Forward
	Reverse	Reverse	Reverse	Slow	Normal	Forward
	search	play	slow	motion	play	search
			motion
-7, -5, -3		-1	-1/6	1/6	1	2, 3, 5, 7

BAdjust tracking manually

Press PR +/– to adjust tracking.

●To return to automatic tracking, press p on the remote control.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Repeat playback

Your video recorder can automatically play back the whole tape 100 times repeatedly.

When the tape is not running

Rewind/fast-forward

Press 3 or 5.

Eject the tape

Press 0.

●You can also eject the cassette when the recorder is turned off.

Turn off the recorder

Press 1.

Playback Features

Index search

Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

— Activate Index Search

Press PUSH JOG w or e (2 or 6) on the remote control.

“2 1” or “6 1” is displayed on screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press PUSH JOG w or e repeatedly until the correct index number is displayed.

Ex.:To locate the beginning of B from the current position, press PUSH JOG w twice. To locate the beginning of D from the current position, press PUSH JOG e once.

●When the specified index code

is located, playback begins automatically.

Manual tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR +/– buttons.

AOverride automatic tracking

Press p on the remote control to engage manual tracking.

AStart playback

Press 4.

BActivate repeat playback

Press 4 and hold for over 5 seconds, then release.

●The Play indicator (u) on the display panel blinks slowly.

●The tape plays 100 times automatically, and then stops.

CStop playback

●Press 8 at any time to stop playback.

NOTES:

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

●Repeat Playback is not possible with a PAL tape recorded in EP mode.

Next function memory

The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode.

a– For Automatic Start Of Playback After Tape Rewind...

...press 3, then press 4 within 2 seconds. b– For Automatic Power Off After Tape Rewind...

...press 3, then press 1 within 2 seconds.

c– For Automatic Timer Standby After Tape Rewind...

...press 3, then press # within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer functions if the cassette’s record safety tab is removed.

Tape position indicator

The tape position indicator appears
on screen when, from the Stop mode,
you press 5, 3 or perform an
Index Search. The position of “8” in
relation to “0” (beginning) or “+”
(end) shows you where you are on the
tape.
“O.S.D.” ( 16) must be set to	Beginning	End
“ON”, or the indicator will not
appear.

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

Skip search

— Skip over unwanted sections

Press 30 SEC 1 to 4 times during playback. Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

NOTE:

Before return to normal playback during a Skip Search, press 4.

— 7 —