JVC LPT0799-001A, HR-S6960AA Basic Connections, RF Connection, AV Connection, S-video Connection

Basic Connections

ACheck contents

Make sure the package contains all of the accessories listed in “Specifications” ( 22).

BSituate recorder

Place the recorder on a stable, horizontal surface.

CConnect recorder to TV

RF Connection

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector on the rear of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear of the recorder and the TV’s aerial connector.

AV Connection

If your TV is equipped with a AV Input Terminals connector, perform AV connection to improve picture quality during tape playback.

Aerial terminal

Back of TV

AV-IN terminals

RF cable (provided)

AV cable

TV aerial cable

AConnect the aerial, recorder and TV as shown in the illustration.

BConnect an optional AV cable between the AUDIO OUT/ VIDEO OUT connector on the rear of the recorder and the AV-IN terminals.

S-video Connection

(allows you to make the most of the S-VHS picture performance.) If your TV is equipped with a S-video input connector

APerform “RF Connection” previously described.

B Connect the supplied S-video cable between the S-VIDEO

OUT connector on the rear of the recorder and the S-video

input connector on the TV.

Mains power cord

(not provided)

S-video cable (provided)

(MONO)

CConnect an audio cable between the AUDIO OUT connectors on the rear of the recorder and the audio input connectors on the TV.

●Even if you are using audio/video cables to connect your recorder to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another.

DConnect recorder to mains

Plug the mains power cord into a mains outlet.

Back of recorder

Mains outlet S-VIDEO OUT AUDIO OUT/VIDEO OUT

Connect the power plug to an AC outlet before installing the lithium battery. ( 2)

— 4 —