JVC HR-S6960AA Tuner Setting, Multi-brand Remote Control, Auto Channel Set, DVD Multi-brand Code

Multi-brand Remote Control

For satellite receiver, cable box and DVD

Your remote control can operate the basic functions of your satellite receiver, cable box or DVD.

Tuner Setting

Turn on the TV and select the VIDEO channel (or AV mode).

ATurn on unit

Turn on the cable box, satellite receiver or DVD using the Power button on the unit or its remote control.

BSet brand code

APress and hold CABLE/SAT/DVD.

BPress the number keys to enter your unit’s brand code.

CPress OK, and release CABLE/SAT/DVD. Check if the unit's power goes off as it should. If it does, try other operations ( step 2).

● Once you have set the remote control to operate the unit, you

don't have to repeat this step until you replace your remote

control's batteries.

IMPORTANT

Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function ( 5) or if you have moved to a different area or if a new station starts broadcasting in your area.

Your recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area so that you can call them up with the PR +/– buttons without going through any vacant channels.

● Some brands have more than one code. If the unit does not

function with one code, try entering another.

COperate unit

First, press CABLE/SAT/DVD to set the remote control to cable box, satellite receiver or DVD mode, then press one of the following buttons:

For satellite receiver and cable box . . .

1, TV PR +/–,number keys. For DVD. . .

1, 4, 8, 9, 5, 3, w e (26) keys.

● For some brands, you must press OK after having pressed the

number keys to enter a channel number.

● To change the unit’s channels, press TV PR +/– or the number

Auto Channel Set

ATurn on the recorder

Press 1.

BAccess Main Menu screen

Press MENU.

CAccess Tuner Set screen

Press PUSH JOG rt to place the pointer next to “TUNER SET”, then press OK or PUSH JOG e.

MAIN MENU

PROGRAMME NAVIGATION FUNCTION SET

TUNER SET

INITIAL SET

[R/T] [MENU] : EXIT

keys. (The PR +/– button can be used to change the recorder’s

channels only.)

IMPORTANT

Although the provided remote control unit is compatible with JVC satelite receiver and DVD, as well as many other models, it may not work with your unit, or in some instances, may have limited function capability.

Cable Box or Satellite Receiver Multi-brand Code

CABLE BOX	CODE	CABLE BOX	CODE
BRAND NAME		BRAND NAME
JVC	72, 73	KATHREIN	70, 71
AMSTRAD	60, 61, 62, 63, 92	LUXOR	68
BT	72	MASPRO	70
CANAL+	81	NOKIA	68, 87
CANAL SATELLITE	81	PACE	67, 86, 92
D-box	85	PANASONIC	13, 14, 74
ECHOSTAR	51, 78, 79, 80, 82	PFT	69
FINLUX	68	PHILIPS	66, 84
GALAXIS	69, 88	PHONOTREND	69
GRUNDIG	64, 65	SALORA	68
HIRSCHMANN	64	SKYMASTER	69
ITT	68	TPS	83
JERROLD	01, 04, 06, 11,12,	VIDEOWAY	03, 09, 22, 76, 77
	15, 28, 75	WISI	64

DVD Multi-brand Code

DVD BRAND NAME	CODE
JVC	55
PANASONIC	58
PHILIPS	56
TOSHIBA	57

D Select Auto CH Set mode								TUNER SET
Press PUSH JOG rt to place the							CH EDIT
pointer next to “AUTO CH SET”, then
							AUTO CH SET
press OK or PUSH JOG e.
						[R/T]
						[MENU] : EXIT
E Select TV system							TV SYSTEM SELECT
Press PUSH JOG rt to place the								B/G
pointer next to the appropriate TV								D/K
								I
system, then press OK or PUSH JOG e.
● Auto Channel Set will start.
						[R/T]
						[MENU] : EXIT
	CH	FRQ	SYS	CH	FRQ SYS
AUTO CH SET	01	150	BG	07	229		BG
	02	165	BG	08	237		BG
PLEASE WAIT	03	195	BG	09	355		BG
	04	205	BG	10	365		BG
	05	213	BG	11	374		BG
	06	221	BG	12	384		BG

START	FINISH	[R/T]	[&] : DELETE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ – – – – – – –		[R/T]	: EDIT

[MENU] : EXIT

FReturn to normal screen

Press MENU.

NOTE:

If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED -NO SIGNAL-” appears on the screen in step 5. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.

IMPORTANT

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Channel Set, the TV system setting for those channels may be

incorrect. Select the appropriate TV system for those channels.  “TV System Selection — When you see the picture but the audio can’t be heard or sounds unnatural” on page 19.

●Since your video recorder memorizes all detected stations even if the reception condition is poor, some of those stored

stations may produce a noisy picture. To delete those stations,  “Delete a Channel” on page 19.

— 18 —