JVC HR-S7700EK, HR-S7722EK setup guide Express Timer Programming, Enter Programme Date

20BASICOPERATIONS(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

			– –:– –		WEEKLY
DC			DAILY
8	1	2	3	2
4	4	5	6
	7	8	9	4		10
	TOP+/	0
2,3	–					PR+/– 6
START+/–			DATE+/
1,9 PROG	1	?				5
					–
			SP/LP		7
		3			OK 9

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS VIDEO PLUS+
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re			– P1 –
	just starting out, “P1”		START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =			[0]:SAT
		[PROG] : EXIT
	The front display panel looks like this:
		SP
	ENTER PROGRAMME
	START TIME
	Press START +/– to enter			– P1 –
	the time you want		START			STOP
3 recording to start.
			21:00	=		– –:– –
	● Press and hold START		SP		VPS/PDC OFF
	+/– to move in 30-		DATE			TV PROG
	minute increments, or		– –.– –				– –
	press and release
		[+/–] =			[0]:SAT
	repeatedly to move 1
		[PROG] : EXIT
	minute at a time.
	The front display panel looks like this:
		SP

	ENTER PROGRAMME STOP
4	TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	● Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.

ENTER PROGRAMME DATE

5 Press DATE +/– to enter the date on which you wish to record. (The current date first appears on screen. The date you enter will appear in its place.)