Masterpage:Right-NoTitle0
EN 7
Filename [HRS7950EU1-EN.fm]
Page 7 March 6, 2002 1:49 pm
ON-SCREEN DISPLAYWhen “O.S.D.” is set to “ON” (墌pg.49), various operational indicators appear on the TV screen.
AOperation Mode Indicators
BTape Speed SP/LP/EP
CTape Direction
DIndex MARK Indicator 墌pg. 24
ECounter Display
FTape Remaining Time Indicator 墌pg.25
GAudio Mode Display 墌pg. 23
HTape Position Indicator
The tape position indicator
appears on the TV screen
when you press 3 or
5from the Stop mode
or perform an Index Search
(墌pg. 22). The position of
“q” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
IVPS/PDC Indicator 墌pg. 29, 31
JType of Broadcast 墌pg.26
KCurrent Day/Month/Year
LClock Display
MChannel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When “L-2 S ELECT” is set to “SAT” (墌pg.43), “SAT” appears
instead of “L-2”.
NTimer Warning Display
A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you’re not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press & on the remote control.
S-VHS ET Indicator
(S-VHS ET : ON/S-VHS ET : OFF) 墌pg. 26, 51
O“Cassette Loaded” Mark
Beginning End
HRS7950EU1-EN.book Page 7 Wednesday, March 6, 2002 1:49 PM