Filename [HRS7950EU1a-EN.fm]
Masterpage:Left
18 EN
Page 18 March 6, 2002 1:21 pm
SAT CONTROL SET (cont.)
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
ATurn on the satellite receiver.
Turn on the satellite receiver’s power.
BAccess the Main Menu screen on the
recorder.
Press MENU.
CAccess the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL
SET”, then press OK or e.
DAccess the Sat Control Set screen.
EEnter the satellite receiver’s brand.
FSelect the satellite receiver’s channel for
testing.
Turn on the TV and select the video channel (or AV
mode).
Press rt to move the
highlight bar (pointer) to
“SAT CONTROL SET”, then
press OK or e.
Press the appropriate number
keys to enter the brand code
from the list on page 19, then
press OK.
●If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
●If the recorder is in playback or
recording mode, you cannot
set the brand code.
Press the appropriate number
keys to enter one of the
channel positions on the
satellite receiver, then press
OK.
●You can select the channel
position between 1 to 999.
●After pressing OK, the recorder
enters the Test mode.
HRS7950EU1-EN.book Page 18 Wednesday, March 6, 2002 1:49 PM