Filename [HRS7950EU4-EN.fm]
Masterpage:Left
58 EN
Page 58 April 11, 2002 2:57 pm
SUBSIDIARY SETTINGS (cont.)

Set Stations (A)

Set station names that are registered in your recorder.
ASelect the item.
Press rt w e until the item you want begins blinking.
BAccess the Manual Channel Set screen.
Press OK twice.
CSelect the new station.
DSwitch the stations.
Press OK.
●The Confirmation screen appears.
●Repeat steps 1 – 4 as necessary.
EClose the Confirmation screen.
Press MENU.

Set Stations (B)

Set station names other than the ones registered in your recorder.
ASelect the character for station name.
BEnter the new character.
Press rt to cycle through the characters (A–Z, 0–9, –, f,
+, I (space) ) and stop when the desired character is
indicated, then press e to enter. Enter the remaining
characters the same way (maximum of 4). After entering
all characters, press OK.
●The Confirmation screen appears.
●If you make a mistake, press w until the incorrect character
begins blinking. Then enter the correct character by pressing
rt.
CClose the Confirmation screen.
Press MENU.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9,
–, f, +, I (space) (maximum of 4).

Fine-Tuning Channels Already Stored

ASelect the channel to fine-tune.
Press rt w e until the channel you want to tune begins
blinking.
BAccess the Manual Channel Set screen.
Press OK twice. The Manual Channel Set screen appears.
CPerform tuning.
Press e until “+/–” begins blinking, then press rt until
the picture is its clearest. Then press OK.
●The Confirmation screen appears.
●Repeat steps 1 – 3 as necessary.
DClose the Confirmation screen.
Press MENU.
Perform steps 1 and 2 of “Manual Channel Set” on page56
to access the Confirmation screen before continuing.
Press e until the station
name (ID) begins blinking,
then press rt until the new
station’s name (ID) you want
to store begins blinking.
Registered station names
(墌pg. 59) appear as you
press rt.
Perform steps 1 and 2 of “Manual Channel Set” on page56
to access the Confirmation screen and then perform steps 1
and 2 of “Set Stations (A)” above before continuing.
Press e until the first letter of
the station name begins
blinking.
Perform steps 1 and 2 of “Manual Channel Set” on page56
to access the Confirmation screen before continuing.
HRS7950EU4-EN.fm Page 58 Thursday, April 11, 2002 2:58 PM