10welcome to jvc
scart and rfSCART is a recommended option because its use improves the quality of the picture.
If connecting to a stereo TV you will need a SCART cable.
There are several types of SCART cables, fully- wired and others.
If you use a SCART cable, you must also connect the RF cable.
connect cables Connect the cables as indicated in the diagram (below), using the TV Aerial Cable, the RF Cable and the
RF Cable (provided)
TV Aerial
Cable
(not
provided)
The AV1
Mains Power Cord
Mains Outlet
|
| SAT |
|
|
|
| CONTROL |
| ANT. IN |
|
| SAT |
| ENTREE |
OUT |
| CTL |
|
|
| L | |||
SORTE |
| |||
VIDEO |
|
|
| ANTENNE |
|
|
|
| R |
|
|
|
| SORTIE |
| IN/DECODER | OUT | RF OUT | |
| ENTREE/DECODEUR | SORTIE |
|
Back of VCR
*DECODER function is not available in the UK.
compatible with the Y/C signal, set
Set your TV to the VIDEO (Or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.
For switching the TV’s mode, refer to the instruction manual of your television.
You are now ready to start the
You have two ways for initial setup of your new VCR depending upon the connection method and your TV.
If you have connected only the RF cable, perform Auto Setup ( pg. 12).
If you have connected both the RF cable and the fully- wired
perform Auto Setup ( pg. 12).
If you have connected both the RF cable and the fully- wired
perform Preset Download ( pg. 13).
*Compatible with TVs offering