[1] ak [MENU]: EXIT

50advanced features

Editing

L-1 OUTPUT/INPUT Setting

The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-1 OUTPUT and L-1 INPUT to the appropriate mode depending on the type of unit connected to the rear panel AV1 (L-1) IN/OUT connector of this VCR.

get to the output/input set screen Press m. Move the highlight bar to

OUTPUT/INPUT SET using the Aand Bbuttons and press

3

OK /

(or E).

 

 

 

select mode Move the highlight bar to L-1 OUTPUT or L-1 INPUT using the Aand B

buttons. Press

3

OK /

(or E) to select the

 

 

 

desired mode:

 

OUTPUT/INPUT SET

 

 

 

FL-1

OUTPUT

VIDEO

L-1

INPUT

VIDEO

L-2

SELECT

A/V

L-2

INPUT

VIDEO

FOR L-1 OUTPUT

• VIDEO : If a connected device’s input is compatible only with regular video signals, set to VIDEO.

•S-VIDEO : If a connected device’s input is compatible with Y/C signals, set to

S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

FOR L-1 INPUT

•VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.

•S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

return to normal screen Press m.

NOTES:

• If L-1 OUTPUT is set to S-VIDEO, it is impossible to set L-1 INPUT to S-VIDEO.