Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC HR-S7965EK 24H ExpressTimer, Programming

1 72

Download 72 pages, 1.56 Mb

28basic features

24H ExpressTimer

Programming

You can program a timer recording that starts within 24 hours using the 24H

EXPRESS cbutton and the Advanced JOG Dial on the VCR.

before you start

Make sure that the VCR’s clock is set correctly

Insert a cassette with the safety tab in place

enter program mode Press the 24H EXPRESS cbutton on the VCR. The Programme Start Time indicator starts blinking on the display panel.

set start time Turn the JOG Dial to the right or left. One click stop of the JOG Dial changes the time in 5-minute intervals.

set stop time Push the centre part of the JOG Dial. The Programme Stop Time indicator starts blinking on the display panel. Turn the JOG Dial to the right or left.

set preset position Push the centre part of the JOG Dial. Turn the JOG Dial to the right or left.

S-VHS VCR

S-VHS VCR

•To set the tape speed, press /(SP/LP/EP).

The current setting for the tape speed appears on the display panel for about 5 seconds. Press /(SP/LP/EP) again to change the setting while tape speed is displayed.

engage timer mode Press the 24H EXPRESS cbutton on the VCR. The VCR turns off automatically and cis displayed on the display panel.

•Before pressing the 24H EXPRESS cbutton to engage the timer mode, you can cancel the setting at anytime by pressing the centre part of the JOG Dial for more than 3 seconds or pressing xon the Remote Control. Repeat the above steps from setting the start time.

•To disengage the Timer Mode, press cor 24H EXPRESS c.

Notes

•You can set this VCR to timer record up to eight programmes. If you try to enter a ninth, FULL appears on the display panel.

•If Err appears on the display panel, repeat the above steps again.

•When a menu screen is shown, you cannot use the 24H Express Timer Programming function. Press mto return to normal screen, and try again.

•You can use the 24H Express Timer Programming function also when the VCR is turned off.

•For the 24H Express Timer Programming function, the programme overlap warning display does not appear even if some programmes overlap each other.

Contents

Page Safety Precautions If in doubt — consult a competent electrician TO MOBILE PHONE USERS: ON PLACING THE RECORDER: Some Do’s And Don’ts ABOVE ALL Subsidiary Information Page Diagram Key Welcome to JVC Page scart and rf GETTING EVERYTHING READY (continued) notes Page Three-StepQuick Start FINISH AUTO SETUP oops START PRESET DOWNLOAD rf and scart connection SET THE VIDEO CHANNEL TO OFF IMPORTANT re-running setup manual station setting Playback Features VIDEO Plus+® Timer Programming Playback Page Playback Features Page Recording non-standard tapes Page VIDEO Plus +® Timer Programming satellite receiver users Page Express Timer Programming Page 24H ExpressTimer Page Page Page Picture Quality select video stabilizer mode Move the highlight bar to select picture control mode Recording AccordingTo TapeType To record in S-VHS: To record in S-VHSET on a VHS cassette: To record in VHS: To record in VHS on an S-VHScassette: The B.E.S.T Picture System Sound Modes Finding Specific Scenes Programme Navigation When inserting a cassette with the record safety tab intact When inserting a cassette whose record safety tab has been removed Programme Navigation Screen Page Page T-VLink Functions get to the mode set screen Press m. Move select direct rec mode Move the highlight Satellite Receiver Control Settings turn on satellite receiver get to the sat control set screen Move the highlight bar to SAT CONTROL enter satellite receiver’s brand Press the select satellite receiver’s preset position for testing If the satellite receiver’s channel number has not been changed correctly Auto Satellite programme satellite receiver l-2 select mode engage vcr in auto mode connectors Editing FOR L-2SELECT FOR L-2INPUT If another VCR is compatible with Y/C signal set vcr’s input mode set edit mode start source vcr Engage its PLAY mode start recording vcr Engage its RECORD mode Page Page Other Functions PR.1 BBC1 NTSC aPAL @24.12.03 -WARNING VPS/PDC Page Page Connection to a Stereo System Video Channel Set Tuner Set Page get to the confirmation screen select character enter new character select channel delete channel Press select item Use the select new position Use the save new details Press Screen will appear again Page Clock Set Question and Answers Troubleshooting CORRECTIVE ACTION RECORDING TIMER RECORDING TIMER RECORDING (cont.) OTHER PROBLEMS List ofTerms s p e c i f i c a t i o n s g e n e r a l v i d e o / a u d i o t u n e r / t i m e r a c c e s s o r i e s