JVC HR-S7965EK 54

54advanced features

Editing from a Camcorder

connect up Connect the VCR and the camcorder with either of the following methods:

AIf the camcorder has NO S-VIDEOoutput connector...

... connect the camcorder’s AUDIO/VIDEO OUT connectors to the VCR’s front panel AUDIO/VIDEO input connectors.

BIf the camcorder has an S-VIDEOoutput connector...

... connect the camcorder’s S-VIDEO OUT and AUDIO OUT connectors to the VCR’s front panel S-VIDEOand AUDIO input connectors.

•When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your VCR.

set vcr’s input mode Press AUX and/or PR so that F-1(for AUDIO/VIDEO input connectors) or S-1(for S-VIDEOand AUDIO input connectors) appears in the place of a preset position number.

set edit mode See Picture Control on page 33.

start camcorder Engage the camcorder’s PLAY mode.

start recorder Press Ton the VCR.

A				B
Your VCR				Your VCR
		24H EXPRESS					24H EXPRESS
		1 32	PR -- / +				1 32	PR -- / +
		1 32	PR -- / +					PUSH /TURN
			PUSH /TURN
PULL/OPEN				PULL/OPEN
S-VHS VCR	SATc	S-VHS			SP/LP/EP	S-VHS VCR	SATc S-VHS
SP/LP/EP	SATc	ET			/ I		ET
/ I					/ I
/ I
AUDIO Input				S-VIDEO	AUDIO Input
VIDEO				S-VIDEO
Input				Input
Video Cable (not provided)				S-Video Cable (not provided)
	Audio Cable						Audio Cable
	Audio Cable						(not provided)
VIDEO OUT	(not provided)				S-VIDEO OUT		(not provided)
VIDEO OUT	(not provided)				S-VIDEO OUT
Camcorder				Camcorder	AUDIO OUT
AUDIO OUT					AUDIO OUT
AUDIO OUT

Contents

Page Safety Precautions If in doubt — consult a competent electrician TO MOBILE PHONE USERS: ON PLACING THE RECORDER: Some Do’s And Don’ts ABOVE ALL Subsidiary Information Page Diagram Key Welcome to JVC Page scart and rf GETTING EVERYTHING READY (continued) notes Page Three-StepQuick Start FINISH AUTO SETUP oops START PRESET DOWNLOAD rf and scart connection SET THE VIDEO CHANNEL TO OFF IMPORTANT re-running setup manual station setting Playback Features VIDEO Plus+® Timer Programming Playback Page Playback Features Page Recording non-standard tapes Page VIDEO Plus +® Timer Programming satellite receiver users Page Express Timer Programming Page 24H ExpressTimer Page Page Page Picture Quality select video stabilizer mode Move the highlight bar to select picture control mode Recording AccordingTo TapeType To record in S-VHS: To record in S-VHSET on a VHS cassette: To record in VHS: To record in VHS on an S-VHScassette: The B.E.S.T Picture System Sound Modes Finding Specific Scenes Programme Navigation When inserting a cassette with the record safety tab intact When inserting a cassette whose record safety tab has been removed Programme Navigation Screen Page Page T-VLink Functions get to the mode set screen Press m. Move select direct rec mode Move the highlight Satellite Receiver Control Settings turn on satellite receiver get to the sat control set screen Move the highlight bar to SAT CONTROL enter satellite receiver’s brand Press the select satellite receiver’s preset position for testing If the satellite receiver’s channel number has not been changed correctly Auto Satellite programme satellite receiver l-2 select mode engage vcr in auto mode connectors Editing FOR L-2SELECT FOR L-2INPUT If another VCR is compatible with Y/C signal set vcr’s input mode set edit mode start source vcr Engage its PLAY mode start recording vcr Engage its RECORD mode Page Page Other Functions PR.1 BBC1 NTSC aPAL @24.12.03 -WARNING VPS/PDC Page Page Connection to a Stereo System Video Channel Set Tuner Set Page get to the confirmation screen select character enter new character select channel delete channel Press select item Use the select new position Use the save new details Press Screen will appear again Page Clock Set Question and Answers Troubleshooting CORRECTIVE ACTION RECORDING TIMER RECORDING TIMER RECORDING (cont.) OTHER PROBLEMS List ofTerms s p e c i f i c a t i o n s g e n e r a l v i d e o / a u d i o t u n e r / t i m e r a c c e s s o r i e s