EN 21
Names of
special-effects
playback
Reverse Forward
Search Play Slow-Motion *Still Slow-Motion Play Search
(Time Jog**) (Time Jog**)
-9x -7x -5x -3x -1x -1/2x -1/3x 0 1/3x 1/2x 1x 1.5x 2x 3x 5x 7x 9x
-7x -3x -1/2x 0 1/2x 1x 1.5x 2x 5x 9x
Audio is output. Audio is not Audio is Audio is Audio is output.
output. output. output.
TimeScan
Speed LP
Speed SP
Audio output
●If the picture jitters vertically, noise appears or the upper or lower part of the picture is distorded at -1/2x, -1/3x, 1/3x, 1/2x or
1.5x normal speed, use TV PROG + or – to correct the picture.
●When noise appears or the upper or lower part of the picture is distorted during TimeScan search, press and adjust
tracking with TV PROG + or – button.
●The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be
distorted.)
●To resume normal playback, press PLAY.
●When using the recorder's TIME SCAN SHUTTLE ring, the playback speed may not change in the correct step if it is turned
too fast.
●Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback
once, and then try using TimeScan again.
●The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with
LP recordings.)
●Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP
recordings, or depending on the tape being used.
●Picture may appear distorted in comparison to normal playback.
●When normal playback resumes from search (including TimeScan), still, slow motion or frame-by-frame playback, the picture
may jitter vertically momentarily depending on the type of TV being used.
●Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
●TimeScan sound quality will differ in comparison to normal playback.
●When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 1.5x or
2x normal speed, the audio playback may be faster than normal.
●Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.
●Time Jog cannot be activated by pressing PAUSE for longer than 2 seconds.
●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
●Picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.
●TimeScan does not work with NTSC playback.
●TimeScan at -1/2x, 1/2x and 1.5x normal speed are not possible with a MESECAM tape.

If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below).

TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required.
* The default setting is "ON".
1Press MENU to access the Main Menu screen.
2Move the highlight bar (pointer) to "MODE SET" by pressing %fi, then press OK or
#
.
3Move the highlight bar (pointer) to "TIME SCAN AUDIO"
by pressing %fi, then press OK or
#
to select "ON" or "OFF".
4Press MENU to return to the normal screen.
**Still mode cannot be engaged using the remote control's
@
or
#
button. Still mode can be engaged by
pressing the PAUSE button.
**Smooth slow motion delivering an uninterrupted moving image without distortion.
PREVIOUS PAGE
POWER SAVE OFF
S-VHS AUTO
AV1 SELECT VIDEO
AV2 SELECT AV2
COLOUR SYSTEMPAL/NTSC
TIME SCAN AUDIO ON
[5∞] =
[MENU] : EXIT
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
NEXT PAGE
[5∞] =
[MENU] : EXIT