JVC HR-S9400EE Activate Instant Review, Index Search, Instant ReView, Mesecam Playback

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press PUSH JOG Þ or %(ª or £) on the remote control. “ª 1” or “£ 1” is displayed on screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press PUSH JOG

Þor % repeatedly until the correct index number is displayed.

Ex.: To locate the beginning of B from the current position, press PUSH JOG Þtwice.

To locate the beginning of D from the current position, press PUSH JOG %once.

Current position

A	B		C	D	E		F
–2		–1	1	2		3
		%		%

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.

EN17

MESECAM Playback

Your recorder is equipped with MESECAM circuitry that can play back MESECAM tapes. MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video recorder.

	LOAD A CASSETTE
1 Insert a cassette recorded in MESECAM.
	ENGAGE MESECAM PLAYBACK
	MODE
	Press MESECAM PLAY-
	BACK; the current setting
	will be displayed on the
2 screen for about 5 seconds.
	Pressing MESECAM	MESECAM P.B. ON
	PLAYBACK while the
	screen shows the display
	changes the setting.

●The setting will remain effective even though

you turn on/off the recorder or you insert/eject the cassette.

●The setting cannot be changed during search, still, frame-by-frame playback or slow motion mode.

START PLAYBACK

3 Press PLAY.

NOTES:

●You can change the "MESECAM P.B." setting even though "O.S.D." is set to "OFF".

●When you play back a PAL or SECAM tape, be sure to set "MESECAM P.B." to "OFF".

Repeat Playback

Your video recorder can automatically play back the whole tape 20 times repeatedly.

1	START PLAYBACK
	Press PLAY.
2	ACTIVATE REPEAT PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
	● The Play indicator ($) on the display panel blinks
	slowly.
	● The tape plays 20 times automatically, and then
	stops.
3	STOP PLAYBACK
	Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.