JVC HR-S9400EE Setup, Make List of Stored Station Names Channel Positions, Timer Recording

28EN

TIMERRECORDING

SHOWVIEW

Setup

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

The SHOWVIEW timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the SHOWVIEW number for the TV program you wish to record (found in most TV listings) and the recorder’s timer is automatically programmed.

You have to set "Guide Prog." numbers, which are assigned to each station for purposes of SHOWVIEW timer programming, for all the stations stored in your recorder's memory to get proper results.

Before SHOWVIEW setup you must have performed the following procedures:

●Tuner setting (☞ pg. 8, 51)

●Clock setting (☞ pg. 12)

IMPORTANT

Perform the following procedure after Auto Set Up on page 8 and/or the channel setting steps on pages 51 – 54.

After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Program Number setting.

MENU

2

1 2 3

4 5 6

7 8 9

04

3

1

Guide Program Number Set

MAKE LIST OF STORED

STATION NAMES AND

CHANNEL POSITIONS

1	(Ex.)
	A Channel position	B Station name
	1	ORT
	2	RTR

TURN ON THE RECORDER

2 Press .

ACCESS MAIN MENU

SCREEN

3 Press MENU twice.

ATTENTION

For a list of Guide Prog. Numbers for Poland, Czech Republic, Hungary, and Russia, refer to page 58 of the instruction manual printed in the corresponding language.