JVC HR-V616EK, HR-V617EK, HR-V615EK manual Three-Step Quick Start, Auto Setup

10

three-step quick start

Three-Step Quick Start

For Step , be sure to perform either of the methods: Auto Setup or Preset Download.

Auto Setup

before you start

Check that the VCR is turned off and no cassette is inserted

Load the batterys into the Remote Control

START AUTO SETUP

Press the obutton. If ‘Auto’ appears on the display panel, press OK button (or ).

what will happen? The display panel on the front of the VCR will show the word ‘Auto’. Do not press any button on the VCR or the Remote Control. note If you have connected both the RF cable and the fully-wired 21-pin SCART cable, and if your TV offers T-V Link, etc., and the TV is turned on, the VCR automatically performs the Preset Download (☞ pg. 11) even if you select ‘Auto’ for Auto Setup function.

Refer to the Remote Control diagram on pages 6–7

Unless indicated otherwise, use the

		SAT	The VCR is automatically setting up the tuner
	VCR		channels, clock, the VIDEO Plus+ assigned Guide
		REVIEW	Program numbers and the video channel. This only
Auto Setup is running: don’t			happens the first time that the VCR is turned on.
touch any buttons

buttons on the Remote

AUTO SET

rf and scart connection If you have chosen to connect the VCR to the TV with both the RF Cable

Control

Check that the connection is completed

Turn on the TV

PLEASE WAITand a 21-pin SCART Cable (not provided) and the TV set is in its AV mode (see the TV manual), you will see the following information displayed on your TV screen:

[MENU]: EXIT

Your TV screen during Auto Setup if SCART is used

– –:– –

SELECT THE VIDEO CHANNEL

When Auto Setup has finished, you will see the following display panel on your VCR:

rf cable only If you have only used the RF
Cable to connect the VCR to the TV, you will		SAT
see this display. The number is the channel on	VCR
		REVIEW
the TV that the Auto Setup has chosen to be the
video channel. In the example, we have pre-
sumed that channel 52 is vacant and have set the VCR to 52:
Now tune the TV set to channel 52 (refer to TV manual if
necessary); you should see two vertical white bars appear

on the TV screen. If the bars do not appear or are not clear, choose another vacant channel pressing PR +/--on the Remote Control and try again. If you cannot obtain the vertical white bars on any channel between 22 and 69, consult your local JVC dealer.

rf and scart connection If you have chosen

to connect the VCR to the TV with both the RF		SAT
Cable and a 21-pin SCART Cable (not provided),	VCR
you need to press PR --on the Remote Control		REVIEW
until the figure reads ‘– –’. This is because you

will use the TV in AV mode to view video pictures and therefore do not need a dedicated video channel.

HR-V615/616/617EK-EN/p08-12 10 3/8/04, 10:06 AM

Black