18
basic features
Recording
TV signals being received by the recorder’s built in tuner can be recorded onto a video tape. You can ‘capture’ a TV programme using your VCR.
Choose a Programme
before you start
Turn the TV on
Tune the TV to your Video Channel or to its AV mode
Choose a blank cassette which has the record safety tab still in place
Record
Safety Tab
Load the cassette into the VCR (see page 14)
Press PR or PR or the number keys on the Remote Control or PR +/– on the VCR to select the channel that you wish to record.
Set the Tape Speed
Press /. The current setting for the tape speed appears on the
Start Recording
There are two ways to start recording:
method one Press and hold Tand then press .on the Remote Control.
method two Press Ton the VCR.
When “DIRECT REC” is set to “ON” (☞pg. 35), if you press any button just after pressing Ton the VCR (or Tand .on the Remote Control), the recorder may not function properly.
Pause and Resume During Recording
On either the VCR or the Remote Control, press to temporarily stop recording and press .to resume. You cannot change the preset position on the VCR while it is recording but you can while it is paused (see Choose a Programme at the top of this page).
18 | 3/8/04, 10:08 AM |
Black