IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against

EN3

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND CLAMP

them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 2 Page 4
Page 3
Image 3
JVC HR-VP655U manual Grounding or Polarization, Power Sources, Overloading, Power Cord Protection, Ventilation, Lightning
Page 2 Page 4

HR-VP655U specifications

The JVC HR-VP655U is a remarkable VHS VCR that showcases the pinnacle of video recording technology available during its time. As part of JVC's extensive lineup of consumer electronics, this model combines functionality with ease of use, catering to both casual viewers and dedicated videophiles.

One of the standout features of the HR-VP655U is its Super VHS capability, which enables higher resolution recording compared to standard VHS formats. Super VHS delivers enhanced picture quality by allowing a wider video bandwidth, resulting in sharper images and greater detail. This feature is particularly beneficial for those looking to archive family videos or enjoy classic films with better clarity.

The HR-VP655U also integrates advanced noise reduction technologies, including JVC's Digital Noise Reduction (DNR) system. This innovative feature helps to minimize graininess and enhance image quality, ensuring that viewers experience clearer and more vibrant playback. This is especially useful when recording from sources with less-than-ideal signal quality.

Another significant characteristic of the HR-VP655U is its compatibility with both standard VHS and Super VHS tapes. This versatility allows users to play and record on a wide variety of media, ensuring that even older tapes can be enjoyed without compatibility issues. Additionally, the VCR supports 4-head recording, which improves tracking and playback quality, providing a smoother viewing experience.

The HR-VP655U is also equipped with a user-friendly on-screen display and easy-to-navigate controls. This simplifies the process of programming recordings and adjusting settings, making it accessible to users of all ages. The model features a built-in timer recording function, allowing users to schedule video recordings at their convenience, ensuring they never miss their favorite shows or important events.

Moreover, the reawakening of nostalgic memories is supported by the VCR's ability to play back a variety of formats, ensuring compatibility with many consumer tapes. The HR-VP655U maintains a solid build quality, reflecting JVC's commitment to durability and longevity in its products.

In summary, the JVC HR-VP655U combines innovative video technology with user-friendly features, ensuring high-quality recordings and playback. Its Super VHS capabilities, integrated noise reduction, and compatibility with various tape formats make it a reliable option for anyone seeking to preserve their video library or enjoy a classic viewing experience. With its blend of performance and convenience, the HR-VP655U remains a noteworthy model in the history of video recording devices.
Top Page Image Contents