Power Levels and Time Variations
The power level function enables you to adapt the amount of energy GB dissipated and thus the time required to cook or reheat your food,
according to its type and quantity. You can choose between the power levels below.
|
|
| CM1919 | CM1619 | CM1319 | |||
Power Level |
|
|
|
|
|
|
| |
| Percen- | Output | Percen- | Output | Percen- | Output | ||
|
|
| ||||||
|
|
| tage |
| tage |
| tage |
|
|
|
|
|
|
|
|
|
|
HIGH ( | ) |
| 100 % | 1850 W | 100 % | 1600 W | 100 % | 1300 W |
MEDIUM ( ) |
| 70 % | 1295 W | 70 % | 1120 W | 70 % | 910 W | |
LOW ( | ) |
| 50 % | 925 W | 50 % | 800 W | 50 % | 650 W |
HIGH DEFROST ( | ) | 20 % | 370 W | 25 % | 400 W | 30 % | 390 W | |
LOW DEFROST ( | ) | 10 % | 185 W | 13 % | 208 W | 15 % | 195 W | |
|
|
|
|
|
|
|
|
|
The cooking times given in recipes and in this booklet correspond to the specific power level indicated.
Power Level |
| Max. Time | |
HIGH ( | ) |
| 25 min. |
MEDIUM ( ) |
| 40 min. | |
LOW ( | ) |
| 40 min. |
HIGH DEFROST ( | ) | 50 min. | |
LOW DEFROST ( | ) | 50 min. | |
✉The maximum time available per power level is shown in the table above.
A defrosting time can be set up to 50 min. But the time is reduced to 25 min (for HIGH) or 40 min (for MEDIUM or LOW) the moment you change the current power level (DEFROST) to other level such as HIGH, MEDIUM or LOW.
Example: If you set a defrosting time to 45min with the heating mode at DEFROST and if you change the power level to HIGH, the time will be automatically reduced to 25min.
✉You can set the power level first and the cooking time next, and vice versa.
Stopping the Cooking
You can stop cooking at any time so that you can:
•Check the food
•Turn the food over or stir it
•Leave it to stand
To stop the cooking... |
| Then... | |
|
|
| |
Temporarily | Open the door or press | pad once. | |
| Result : | Cooking stops. | |
| To resume cooking, close the door and press | ||
| again. |
|
|
|
|
|
|
Completely | Press the | pad twice. |
|
| Result : The cooking settings are | ||
|
| cancelled. |
|
✉If you want to cancel any cooking settings before starting cooking, simply press CANCEL( 
) once.
Using +20sec Pad
This is a ONE TOUCH COOK button.
By touching the button once, you can start heating instantly.
You can increase the cooking time by pressing the +20sec button when in a heating cycle.
The cooking time increases by 20 seconds at each press on +20sec button. But it can not exceed the maximum time allowed for the power level selected.
Before operating the oven, times can be increased using the +20sec button. During the operating, time may only be added by using the +20sec button.
6
