Cooking / Reheating
Make sure the oven is plugged into a properly earthed electrical outlet and “ON” appears in the display window.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven and then close the door securely (The oven lamp will go off.).
1. Select the desired power level by rotating the COOKING POWER CONTROL DIAL.
Result : The selected power level will be displayed in the display window.
2.Set the desired heating time by rotating the TIMER DIAL.
Result : “ON” blinks and the selected time is displayed in the display window.
3.Press 
button:
Result : The oven lamp and cooling fan will be turned on. Heating will start.
The time on digital display will count down.
✉When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop. The oven lamp will go off. For 1 min, the display shows ‘0‘ and the cooling fan will keep working in order to cool down the interior parts.
During the time, the fan will not stop even when you open the door. 1 min later it will stop and “ON” appears again. Food may be removed from oven whilst the fan is still running.
4.Open the door and take the food out. Close the door. The oven lamp will go off.
✉Whilst heating, one press on 
pad stops the oven. You can restart it
by pressing the 
pad or a second press on 
pad will cancel the selected program. When it is NOT in a heating cycle, one tap on 
pad cancels the selected program. You can set the power level first and then the cooking time next, or vice versa. You can press +20sec button one or more times in order to add the cooking time by 20 seconds.
✉When heating cycle is completed and you open the door, the oven lamp automatically turns on and goes off 1 min later.
✉When you open the door whilst in a heating cycle, the oven stops operating and the oven lamp automatically turns on for 1 min and goes off 1 min later. If you leave the oven door open for more than 1 min, the oven beeps once every minute and after 5 min the power source check indicator ‘ON’ appears in the display window.
✉When in a heating cycle, you can not change the power level or heating time. But you can add 20 sec increments using the +20sec pad. The dial may be rotated but this does not affect the current operation and the display remains the same. It becomes effective next time you set the oven manually after you finish the current heating. If you want to change the current setting, firstly stop the heating by using CANCEL pad and set desired power level and cooking time again.
But when you are NOT in a heating cycle, you can change the power level and heating time. Changed values are promptly shown in the display.
✉The oven is designed not to work when power level is set to “0” mode between the heating mode and the defrosting mode.
✉When you first plug in the power cord, the oven beeps once and all the indicators show for 5 sec in the display window.
GB
5
