CLOCK SET
TIME DATE YEAR 1:00PM 12/24 00 SUN
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO PRESS (5,), THEN (OK)
PRESS (MENU) TO END

EN 11

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T./time zone setting manually.

First follow steps 1to 3on page 10, then go to the following4steps.

Set Auto Clock to ON

On the front panel: Press OK to move the highlight bar to “AUTO CLOCK”, then press CH 5∞ so that “ON” is selected.

On the Remote:

Press SHUTTLE PLUS # to move the highlight bar to “AUTO CLOCK”, then press SHUTTLE PLUS %fi so that “ON” is selected.

Then;

To select the host channel — go to step 5. To select the D.S.T. mode — go to step 6. To select the time zone — go to step 7.

NOTE:

The time that has been set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME

5ZONE” setting is changed.

Select host channel

You can either select “AUTO” or enter a PBS channel number.

On the front panel:

Press OK to move the highlight bar to “HOST CH”, then press CH 5∞ repeatedly until “AUTO” or the desired PBS channel number is selected.

On the Remote:

Press SHUTTLE PLUS # to move the highlight bar to “HOST CH”, then press SHUTTLE PLUS %fi until “AUTO” or the desired PBS channel number is selected.

NOTE:

Some PBS channels do not transmit clock setting data.

6Select D.S.T. mode

You have three choices:

AUTO– Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*)

ON– Adjustment will be made by the clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

On the front panel:

Press OK to move the highlight bar to “D.S.T.”, then press CH 5∞ repeatedly until the desired setting is selected.

On the Remote:

Press SHUTTLE PLUS # to move the highlight bar to “D.S.T.”, then press SHUTTLE PLUS %fi

7repeatedly until the desired setting is selected.

Select time zone

You can select the time zone automatically or manually.

On the front panel:

Press OK to move the highlight bar to “TIME ZONE”, then press CH 5∞ repeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:

OAUTO O ATLANTIC O EASTERN

OCENTRAL O MOUNTAIN O PACIFIC

OALASKA O HAWAII O (back to the beginning)

On the Remote:

Press SHUTTLE PLUS # to move the highlight bar to “TIME ZONE”, press SHUTTLE PLUS %fi repeatedly until “AUTO” or the desired time zone is selected (see above).

NOTE:

If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step 5,

8be sure to select the correct time zone manually.

* Auto Daylight Saving Time

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . .

on the first Sunday of April at 2:00 AM, the clock is

adjusted to 3:00 AM.

. . .

on the last Sunday of October at 2:00 AM, the

clock is adjusted to 1:00 AM.

Return to normal screen

Press MENU.

IMPORTANT

Turn off the VCR after performing Semiauto Clock Set. “Auto” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.

Page 11
Image 11
JVC HR-VP78U manual Setting clock semiautomatically, Set Auto Clock to on, Select host channel, Select D.S.T. mode