JVC HR-VP78U manual Tuner Setting, Automatically Auto Channel Set Setting channels

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

AUTO CHANNEL SET

SCANNING...

PRESS (MENU) TO END

TUNER SET

BAND

=AUTO CHANNEL SET

MANUAL CHANNEL SET

CATV

			EN 13
Tuner Setting		automatically — Auto Channel Set
		Setting channels
		Use Auto Channel Set only if channels have not been set
		correctly by the Plug & Play setting or if you use a cable
Turn on the VCR and the TV, and select the VCR
		box. If you want to add or delete channels, use Manual
channel 3 or 4 (or AV mode) on the TV.		Channel1Set ( pg. 14).
	2314
			Access Main Menu screen
		2Press MENU.
			Access Tuner Set screen

						On the front panel:	MAIN MENU
						Press CH 5∞ to move
							FUNCTION SET
						the highlight bar (arrow)
			REW		FF		= TUNER SET
			PLAY			to “TUNER SET”, then	INITIAL SET
POWER
						press OK.
VIDEO (MONO)L—AUDIO—R						On the Remote:	PRESS (5,∞), THEN (OK)
OK	SP EP	CH
	VCR		2SP/EP	3REC STOP/EJECT	PAUSE
						Press SHUTTLE PLUS	PRESS (MENU) TO END
						%fi to move the highlight bar (arrow) to “TUNER
						3SET”, then press OK or SHUTTLE PLUS #.

1 2 3

2

4 5 6

7 8 9

04

1

Perform Auto Channel Set

You can automatically set the receivable channels in your area in the order of their frequencies.

On the front panel: Press CH 5∞ to move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press OK.

On the Remote: Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to

“AUTO CHANNEL

SET”, then press OK or SHUTTLE PLUS #.

	23	NOTES:
		● When Auto Channel Set is complete, “SCAN
		COMPLETED” appears on screen.
14		● If the scan was unsuccessful, “SCAN COMPLETED–
		NO SIGNAL” appears on screen. Check the
		4connections and start again.

Return to normal screen

Press MENU.

INFORMATION

The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.