EN 25
Basic
Recording
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
23SHUTTLE4ring
2Select recording channel
On the front panel:
Press CH 5∞.
On the Remote:
a– Press CH + or
b– Press the Number keys.
● If you connect the TV and the VCR only using |
the RF connection, press TV/VCR on the Remote |
so that the VCR mode indicator lights on the front |
POWERPLAY ( # )
REW
|
|
| PLAY |
POWER |
|
|
|
MENU |
|
|
|
VIDEO |
|
|
|
OK | SP | EP | CH |
| VCR | ||
|
|
| SP/EP |
STOP/EJECT | PAUSE |
3display panel, to view the program to be recorded. |
Set tape speed
4Press SP/EP to set the recording speed.
Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
TV/VCR
1
4
7
4
1
REW ( 1 )
STOP/EJECT ( 7 / 0 )
PAUSE ( 8 )
POWER
23
2
56 
2–b
89
0 | 4 |
|
|
FF ( ¡ )
PAUSE ( 8 )
STOP ( 7 )
●If “VIDEO CALIBRATION” is set to “ON” (default setting: pg. 38, 39), this VCR checks the tape condition for about seven seconds, then starts recording. This means that the first seven seconds of the program will not be recorded. If this is inconvenient for you, follow the1steps below:
Press REC ( ¶ ) and PAUSE ( 8 ) to start
2Video Calibration.
Then press PLAY ( 3 ) to start recording after Video Calibration is complete.
To pause recording
Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
To rewind the tape (when the tape is not running)
Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).
To
Press FF ( ¡ ) (or turn the SHUTTLE ring on the front panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.
This VCR can check the tape condition during recording (and1playback), and realizes the best possible pictures.
Load a cassette
●You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
