36 EN | TIMER RECORDING (cont.) |
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
A
1 2 3
2
A Checking program settings
1 Disengage timer
Press TIMER, then press POWER.
●When “AUTO TIMER” ( pg. 38, 39) is set to “ON”, you do not have to press TIMER.
2 Access Program Check screen
Press PROG. CHECK. | PR START | STOP | CH | DATE | |
| 1 | 8:00P | 10:00 | 12 | 12/24 |
| 2 | 10:00A | 10:45 | 40 | 12/25 |
| 3 | 11:30P | 1:00 | 125 | 12/25 |
4
B
C
4
7
56
89
0
A
B
B
C
5
6
7
8
PRESS (CHECK) TO NEXT
3 Access Program screen
Press PROG. CHECK again to check more detailed information. Each time you press PROG. CHECK,
A
B
1
B
C
C
C
the next program’s Program screen appears. When all Program screens are shown, normal screen resumes.
B Cancelingsettings or changing program
1 Access Program screen Repeat steps 1 to 3 above.
2 Cancel or change program setting
To cancel a program, press CANCEL when the Program screen you do not want is shown.
To change a program, press the appropriate button:
3 Return to normal screen
Press PROG. CHECK as many times as necessary until no Program screen is shown.
Other Useful functions for timer recording
You can also use the following functions for timer recording.
●Auto Timer ( pg. 39)
When “AUTO TIMER” is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.
●Auto SP = EP Timer ( pg. 40)
If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a broadcast of more than 2 hours in length.
4 Reengage timer recording standby mode
Press TIMER.
●When “AUTO TIMER” ( pg. 38, 39) is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.
