JVC HR-VP78U manual Select input mode on this VCR, Access Main Menu screen on this VCR

FUNCTION

= VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

AUTO TIMEROFF

SUPERIMPOSE ON AUTO SP=EP TIMER OFF

VIDEO STABILIZER OFF NEXT PAGE

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

PREVIOUS PAGE

BLUE BACKON 2ND AUDIO RECORD OFF

AUDIO MONITOR HI-FI

= AV COMPU-LINK OFF

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

7 EN 45

You can use a camcorder as the playback VCR and your VCR1as the recording VCR

Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s video audio/video input connectors.

●When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

●When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector

2on this VCR.

Load a cassette

Insert the cassette to be recorded on into this

3VCR (for recording).

Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Press CH 5∞.

On the Remote:

4Press the Number key "0 (AUX)" or CH +/–.

Access Main Menu screen on this VCR

5Press MENU.

Access Function Set screen

On the front panel:

Press CH 5∞ to move the highlight bar (arrow) to “FUNCTION SET”, then press OK.

On the Remote:

Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “FUNCTION SET”, then press OK

6or SHUTTLE PLUS #.

Enable remote pause function

On the front panel: Press CH 5∞ to move the highlight bar (arrow) to “AV COMPU-LINK”, then press OK to set it to “OFF”.

On the Remote: Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “AV COMPU-LINK”, then press OK or SHUTTLE PLUS # to set it to “OFF”.

● The REMOTE PAUSE/

AV COMPU-LINK

connector works as the AV Compulink connector when “AV COMPU-LINK” is set to “ON” (  pg. 38 and 41), and works as the Remote Pause connector when “AV COMPU-

8LINK” is set to “OFF”.

Return to normal screen

9Press MENU.

Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting

0playback.

Start recording

On the front panel:

Press REC ( ¶ ).

On the Remote:

Press REC ( ¶ ) and PLAY ( 3 ) at the same time.

●If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

Select “EDIT” for Picture Control

Follow the procedure described on pages 38 and 39.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 7.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 8.

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or

“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 38 and 39).